Nexgrill Gas Grill 720 0001 R User Manual

ASSEMBLY & OPERATING INSTRUCTIONS FOR OUTDOOR  
GAS GRILL  
FOR MODEL 720-0001-R OUTDOOR GRILL  
 
TABLE OF CONTENTS  
Safety Instructions…………………………...1-4  
Assembly Instructions………………………..5  
Lighting Instructions…………………………6  
Care & Maintenance…………………………7  
Cooking Instructions…………………………8  
Lighting Rod Assembly Instructions………..9-10  
Illustrated Parts Breakdown………………...11  
Parts List……………………………………...11  
Trouble Shooting……………………………..12  
Limited Warranty…………………………...13  
 
Safety Instructions  
Read carefully before assembling and operating your gas grill.  
INSTALLATION  
This gas grill must be installed in accordance with the local codes or, if in an area without local codes, with the latest  
edition of the National Fuel Gas Code ANSI Z223.1. In Canada, installation must conform to the standard  
CAN/CGA 1-b149.1 and/or .2 (Installation Code for Gas Burning Appliances and Equipment) and any local codes.  
THE LOCATION FOR YOUR GRILL  
Do not use your gas grill in garages, porches, breezeways, sheds or other enclosed areas. Your gas grill is to be used  
outdoor only, at least 21” from the back and side to any combustible surface. The grill should not be placed under  
any surface that will burn. Do not obstruct the flow of combustion and ventilation air around the grill housing.  
This outdoor cooking gas appliance is not intended to be installed in or on recreational vehicles and/or boats.  
DANGER !  
If you smell gas:  
1. Shut off gas to the appliance.  
2. Extinguish any open flame.  
3. Open lid.  
4. If odor continues, keep away from the appliance and immediately call your gas supplier  
or your fire department.  
FOR YOUR SAFETY  
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or  
any other appliance.  
Do not store empty or full spare gas cylinders under or near this or any other appliance.  
Keep the fuel hose and any electrical cord away from hot surfaces. Protect fuel hose from  
dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior to each use  
for cuts, cracks, excessive wear or other damage. Replace hose, if necessary.  
Never test for gas leaks with a lighted match or open flame. Never light grill with lid closed.  
Never lean over cooking surface while lighting grill. Use barbecue tools with wood handles  
and good quality insulated oven mitts when operating the grill.  
The Fuel System  
Gas grills are used safely by millions of people when following simple safety precautions.  
The items in the fuel system are designed for operation with the Beefmaster Explorer grill. They must not be  
replaced with any other brand. (See parts list for replacement items.)  
GAS BURNER: The gas burner is constructed of tubular stainless steel and should not require maintenance other  
than inspection for insects/nests inside the air intake slots.  
- 2 -  
 
BURNER VALVE/REGULATOR: The burner control is actually a regulator/valve assembly. The regulator  
attaches directly to the end of the burner, which extends out of the right end of the grill body, a 1-pound propane  
cylinder threads into the regulator. The burner control operates in the following positions indicated by the pointer at  
the top of the regulator as installed on the grill:  
OFF – This stops the flow of gas to the burner.  
PUSH TO TURN ON – You must push “IN” on the knob to release the knob from the locked “OFF” position.  
HIGH – This position provides the highest gas flow and hottest cooking temperatures.  
MED – This position provides cooking temperatures between HIGH and LOW.  
LOW – This position provides the lowest cooking temperatures.  
ONLY A FACTORY SUPPLIED GAS VALVE/REGULATOR SHOULD BE USED. See parts list for replacement  
items.  
LP GAS REGULATOR CAUTION  
The gas pressure regulator provided with this appliance must be used. This regulator is equipped with the required  
orifice and is set for the required outlet pressure for this appliance. This combination of orifice size and pressure  
regulation specifications provides the cooking performance intended by Beefmaster Explorer. Substitution of  
regulator by any other device or any other manufacturer is dangerous and could result in serious injury.  
LP GAS REGULATOR  
The gas pressure regulator is shipped loose and must be installed prior to operating your grill. This is a “slip-fit”  
requiring no tools. See assembly instructions for proper installation. The regulator may be removed from grill after  
use. Turn the regulator control knob to the “OFF” position; disconnect the LP cylinder and allow the grill to cool for  
at least 30 minutes prior to removing regulator.  
Care should be taken to store the regulator in a clean, secure location when the grill is not in use. The threaded  
cylinder connection area should be kept clean and free off dust, dirt, sand or any foreign materials. Clean both the  
regulator and LP cylinder threaded areas prior to connecting cylinder to regulator.  
PROPANE FUEL: Warning – propane is a flammable gas. Improper handling may result in an explosion and/or  
fire and serious accident or injury. Your grill is designed to operate with propane (LP) gas only and is equipped with  
the proper orifice for propane gas.  
Caution: Do not connect this grill with any gas supply other than propane. Propane gas is heavier than air and  
settles in lower areas. Make certain adequate ventilation is available when using your grill .The gas cylinder may be  
stored outside in a well ventilated area out of the reach of children when the grill is not in use.  
LP GAS CYLINDER: This grill is designed and intended to be used with a disposable propane cylinder with a  
nominal fuel weight of 1lb. Such a cylinder is approximately 4” in diameter and 7” long. The Beefmaster Explorer  
does not include an LP gas cylinder. This must be purchased separately and be supplied at most hardware stores.  
The cylinder used must be constructed in accordance with the specifications for LP cylinders of the U.S. Department  
of Transportation (DOT) DOT-39 NRC232/290 M1110.  
The LP gas cylinder shall be used only outdoors in a well-ventilated space and not in a building, garage, or any other  
enclosed area. The Beefmaster Explorer may be stored indoors if the LP gas cylinder is removed and stored  
outdoors.  
The LP gas cylinder (not included) is threaded for connection directly to the gas regulator supplied with this  
appliance.  
The LP gas cylinder is provided with a threaded connection for accessory directly to the gas regulator supplied with  
this appliance. Care should be taken when threading the cylinder to the regulator to engage threads correctly to  
achieve the proper and intended connection. When disconnecting or connecting the gas cylinder, be careful that the  
regulator does not strike the grill, the ground, or any other surfaces. Replace the protective cap over the threaded  
cylinder connection when removed from grill. If any difficulty at all occurs when connecting or disconnecting the  
cylinder to the regulator assembly, contact your local gas supplier for assistance.  
When re-connecting the LP gas cylinder to the regulator, be sure to hand-tighten until snug. This connection should  
be inspected for damage and leak tested after re-connection.  
- 3 -  
 
The threaded cylinder connection should be kept clean and free of dust, dirt, sand or any foreign materials. Clean  
both regulator and LP cylinder threaded areas prior to connecting cylinder with regulator.  
Keep any electrical supply cord or fuel supply hose away from any heated surfaces.  
COOKING TEMPERATURE SETTINGS  
HIGH – Approximately 450 degrees F  
MED – Approximately 400 degrees F  
LOW – Approximately 350 degrees F  
NOTE: A disposable 1lb. cylinder “NEAR EMPTY” can significantly reduce or will significantly reduce internal  
pressure and may affect the regulator’s capability to accurately control gas flow. This may cause somewhat hotter-  
than-normal cooking temperatures during the final few minutes of cylinder use as it reaches “empty.”  
NOTE: A disposable 1lb. cylinder will provide approximately 4-6 hours of cooking time with the Beefmaster  
Explorer grill.  
- 4 -  
 
Assembly Instructions  
PLEASE READ THE INSTRUCTION CAREFULLY AND FOLLOW STEP BY STEP. Your Beefmaster  
Explorer grill is pre-assembled. The only part that you need to assemble is to connect gas regulator into your  
grill.  
1. Locate the gas regulator. Grasp the regulator with the knob facing directly up. Line up the collar on the  
regulator with the open end of the burner tube.  
2. Screw the regulator into open end of burner.  
3. Once the regulator is in as far as it will go. Turn it so knob is facing to the front of the grill.  
Note: Always make sure the regulator is secured in the fully lock-in position before attaching propane cylinder.  
4. Be sure gas control knob is in the off position. Refer to the figure below. Check to make sure threaded areas on  
cylinder and regulator are clean. Thread propane cylinder to engage threads correctly to achieve proper  
connection. Removing propane cylinder. Refer to the figure below. Unthread cylinder from regulator as shown.  
- 5 -  
 
Lighting Instructions  
1. Make sure the regulator is properly secured into the burner end.  
2. Make sure the propane cylinder is tightly threaded into the regulator-hand-tighten only.  
3. Open lid.  
4. Locate lighting access hole on right side of the panel.  
5. Insert match or lighter through access hole next to the burner tube. Keep flame next to burner.  
6. Push gas burner control knob “IN” and turn counter-clockwise to “Lighting Position”  
7. If ignition does not occur in 3-5 seconds, turn burner off. Wait 5 minutes and repeat the lighting procedure.  
Note: lf the burner should go out for any reason, turn control knob to “Off” position. Wait 5 minutes before  
attempting to re-light.  
If the grill fails to light after the second attempt, check with your local dealer for assistance.  
With the burner lit, gently close lid and allow grill to warm up for 20-30 minutes prior to use.  
Flames should be blue and stable with no yellow tips, excessive noise or lifting. If any of  
these conditions exist, check to see if the air shutter or burner ports are blocked by dirt,  
debris, spider webs, etc. If you have any questions regarding flame stability, please call  
customer service.  
Typical flame pattern and proper  
flame height.  
TURNING GRILL OFF  
I. Open lid.  
2. Turn regulator control knob to “OFF”.  
3. Caution: Do not attempt to re-light without following all lighting instructions.  
4. Allow grill body to cool at least 30 minutes before attempting to move or transport.  
To adjust for proper flame, use a  
Philips screw driver to loosen  
screw. Turn clockwise to close the  
air shutter, and counterclockwise  
to open. After adjusting, tighten  
screw to fix air shutter.  
- 6 -  
 
Care & Maintenance  
There is very little care and maintenance needed. The Beefmaster Explorer is designed and made of materials that  
will last many years with normal use. Following these instructions will improve the longevity and quality of  
cooking. To ensure safe operation of your grill, the area of cooking should always be kept free of combustible  
materials of any type, such as gasoline or other flammable vapors or liquids.  
1. Outside of body – This is stainless steel. It can be cleaned easily with warm soapy water or any stainless steel  
cleaner.  
2. Grid and drip pan – The grid is made of high quality stainless steel. The grid should be brushed with a brass or  
stainless steel brush immediately after removing food, while grill is still warm. The drip pan is also stainless  
steel and can be cleaned with a flat scraper such as a putty knife. Caution: The drip pan must be kept clean and  
free of heavy buildup for grill to perform properly and to eliminate flare-ups. Drip pan should not be washed  
completely clean.  
3. Inside grill – Use warm soapy water to clean this area. Do not allow grease to build up.  
4. Drain pipe – Drain pipe must be kept clear of grease and food particles to allow grease to drain properly from  
drip pan. This must be done to maintain proper operation of your grill.  
5. General – This grill, like all equipment, will look better and last longer if kept out of weather when not in use.  
Caution: Do not store propane cylinders in enclosed spaces. When using a cover or moving the grill, always  
wait until the grill has cooled for at least 30 minutes.  
Check to be sure all openings into grill body are free of blockages or debris. Make sure there are no objects or  
materials blocking the flow of combustion or ventilation. Make sure the stacks are in the up position when using the  
grill.  
When grill is not in use, turn regulator knob to off, remove propane cylinder from regulator and remove regulator  
from burner.  
For outdoor use only, if stored indoors, detach cylinder and leave it outdoors.  
Cylinders must be stored out of reach of children.  
Check burner air inlet openings (behind inlet guard on right end of body) for insect nests or blockages. Make sure  
the slots in burner tube are open.  
Important  
First-time use. It is important that the grill be lit and allowed to operate at least 30 minutes before any food is placed  
on the grill grid. Some smoke may appear during the initial operation of the grill. This is normal. These are the  
preservatives used during manufacturing. After initial heating, grill is ready for use. After burning off the grill, spray  
the cooking grid, drip pan and inside of the lid, so food does not stick to the grid and the inside is easier to clean.  
THIS COOKING APPLIANCE IS FOR OUTDOOR USE ONLY AND SHALL NOT BE USED IN A BUILDING,  
GARAGE OR ANY OTHER ENCLOSED AREA.  
MOVING INSTRUCTIONS  
Caution: Never move the grill with burner lit!  
Transporting grill: Make sure gas control is off. Disconnect propane cylinder from regulator. Remove regulator from  
grill. Be sure grill has completely cooled (for at least 30 minutes.) Close lid and secure latch. Place stacks in down  
position if necessary. Carry grill by handle between stacks.  
Note: It is best to leave the grease pan in place attached to the bottom of the grill – some grease may continue to drip  
from drainpipe during transport.  
Setting up for use: Find a flat surface. Grill must be on a level surface to operate properly.  
- 7 -  
 
Cooking Instructions  
1. Allow grill to warm up with lid closed for 20-30 minutes prior to cooking.  
2. This Beefmaster Explorer model is equipped with an adjustable HIGH/MED/LOW burner control. This allows  
for complete flexibility in cooking temperatures.  
HIGH setting has a cooking temperature of approximately 450 degrees F.  
MED is approximately 400 degrees F.  
LOW is approximately 350 degrees F.  
3. The cooking times we suggest are only that – suggestions. You may want to vary the times as you become used  
to your grill.  
4. You may cook on the grill in any weather. If the temperature is extremely cold or hot, it will slightly decrease or  
increase your cooking times. Keep grill out of reach of excessive winds when operating, as it may increase  
cooking times.  
GRILLING  
1. Steak – T-bone, 1” thick, medium: grill 10 minutes on each side at MED setting.  
2. Chicken – Quarters, average size fryer: Cook skin side up for 30 minutes and skin side down for 30 minutes at  
MED setting. Check for doneness. If chicken is completely done, only then dip or brush on the sauce or your  
choice. Put back on grill for approximately 10 minutes longer. Note: You may want to repeat this process one or  
two more times.  
3. Pork ribs and chops, ¾” thick: grill 10-20 minutes on each side, MED setting. When done, drip or brush on  
sauce. Put back on grill for 5-10 minutes. Repeat if desired.  
GRILLING INSTRUCTIONS  
Fish grilling: Allow grill to warm up for 15 minutes. Place fish on grill and season to taste. Allow 20-30  
minutes total grilling time, turning at half the grilling time if desired (turning is not necessary).  
Chicken halves or quarters: Place on grill for 60 minutes. Turn at 30 minutes if desired.  
Steak ¾” – 1” thick: Allow grill to warm for 15 minutes, and then place steaks on grill. Allow 6-10 minutes per  
side. Ten minutes on each side will produce medium-well to well-done steaks.  
Hamburger: Same as steak.  
Ribs: Allow grill to warm up for 15 minutes, place ribs on grill. Allow 40-60 minutes grilling time. Turn at half  
the grilling time if desired (not necessary). Baste or dip in sauce at any time.  
Whole chicken: Allow grill to warm up. Season chicken with seasoning mix. Grill for 1-1/2 hours.  
Turkey breast: Allow grill to warm up. Grill 10 minutes per pound, or until internal temperature reaches 170  
degrees F.  
- 8 -  
 
Lightning Rod Assembly Instructions  
PLEASE READ THE INSTRUCTION CAREFULLY AND FOLLOW STEP BY STEP.  
1. Please locate the lightning rod located on the right side of your table top grill.  
Please see the following figure.  
Lightning  
Rod  
9
-
 
-
2. Please attach the match to the front end of the lightning rod, and stick the lightning  
rod into the access to manual lighting hole to light the fire as indicated in below  
picture.  
 
Access to manual lighting  
ILLUSTRATED PARTS BREAKDOWN  
MODEL 720-0001-R TABLE-TOP GRILL  
MODEL 720-0001-R-LP PARTS LIST  
REF#  
DESCRIPTION  
Q’TY  
1
2
Lid, Front  
1 SET  
1 SET  
1 SET  
1PC  
Bowl Assembly  
Handle Assembly  
Cooking Grid  
Flame tamer  
Grease Tray  
Burner  
3
4
5
1 PC  
1PC  
6
7
1 PC  
1 PC  
1 SET  
4 SET  
1PC  
8
Name Plate  
9
Regulator LP  
Foldable Leg  
Gas Collector Box  
Latch  
10  
11  
12  
13  
1SET  
1PC  
Grease Tray Stopper  
11  
 
TROUBLE SHOOTING  
SPIDER AND INSECT WARNING!!!  
1. The smell of gas in conjunction with the burner  
flames appearing yellow.  
2. The grill does not reach temperature.  
3. The grill heats unevenly.  
Spiders and insects can nest in the burners of the  
grill and cause the gas to flow from the front of the  
burner. This is a very dangerous condition, which  
can cause a fire to occur, thereby damaging the grill  
and making it unsafe to operate.  
4. The burners make popping noises.  
BEFORE CALLING FOR SERVICE  
If the grill does not function properly, use the  
following checklist before contacting your dealer for  
service.  
WHEN TO LOOK FOR SPIDERS  
You should inspect the burners at least once a year  
or immediately after any of the following conditions  
occur:  
CHECK LIST  
PROBLEMS  
WHAT TO DO  
Grill won’t light when the control  
knob is turned to on.  
Check to see if the tank is empty.  
Check burner ports for any blockage. Use soft wire brush to clear  
plugged ports.  
Check the gas orifice on the malfunctioning burner for an obstruction.  
If orifice is blocked, Clean it with a needle or a thin wire. NEVER USE  
A WOODEN PICK.  
Burner flame is yellow or orange,  
in conjunction with the odor of  
gas.  
Call our customer service line 1-800-913-8999.  
Is the fuel hose bent or kinked?  
Low heat with knob in “HI”  
position.  
Is the grill in a dusty area?  
Is there adequate gas supply available?  
If it is only one burner that appears low, does the orifice or burner  
need cleaning?  
Is the gas supply, or gas pressure low?  
Is the grill being preheated for 15 minutes?  
12  
 
LIMITED WARRANTY  
MODEL 720-0001-R  
STAINLESS STEEL OUTDOOR GAS GRILL  
Nexgrill Industries, Inc. warrants to the original consumer purchaser of each Outdoor Gas Grill that  
when subject to normal residential use, it is free from defects in workmanship and materials for the  
periods specified below. This warranty excludes grills used in rental or commercial applications.  
Component  
Warranty Period:  
Burners:  
3 Years  
2 Years  
3 Years  
1 Year  
Stainless Steel Flame Tamer:  
Stainless Steel Cooking Grids:  
Regulator  
All Stainless Steel Parts  
3 Years  
Our obligation under this warranty is limited to repair or replacement, at our option, of the product  
during the warranty period. The extent of any liability of Nexgrill Industries, Inc under this warranty is  
limited to repair or replacement. This warranty does not cover normal wear of parts, discoloration of the  
stainless steel parts, or damage resulting from any of the following: negligent use or misuse of the  
product, use on improper fuel/gas supply, use contrary to operating instructions, or alteration by any  
person other than our factory service center. The warranty period is not extended by such repair or  
replacement.  
Warranty claim procedure: If you require service or parts for your grill, please contact our Warranty  
Service Center for factory direct assistance. Our hours of operation are 7 AM to 6 PM PST Monday to  
Friday, 8 AM to 12 PM PST on Saturday. Our number is 1-800-913-8999 and our FAX number is  
1-800-598-8829. Please direct all correspondence to: Nexgrill Industries, Inc. 280 Machlin Court City  
of Industry, CA 91789 ATTN: Warranty Service Center.  
Product repair as provided under this warranty is your exclusive remedy. Nexgrill Industries, Inc. shall  
not be liable for any incidental or consequential damages for breach of any express or implied warranty  
on its products. Except to the extent prohibited by applicable law, any implied warranty of  
merchantability or fitness for a particular purpose on this product is limited to the duration of the above  
warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages,  
or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may  
not apply to you. This warranty gives you specific legal rights, and you may have other rights, which  
vary from state to state.  
Printed In China  
13  
 

Miele Ventilation Hood 09 968 440 User Manual
Miele Ventilation Hood DA 3160 EXT User Manual
Nokia Cell Phone 2220 RH 42 User Manual
Oki All in One Printer CX2633 User Manual
Olympus Carrying Case 033 User Manual
Oster Toaster CkSTWF 1502 ECP_13EM1 User Manual
Panasonic All in One Printer KXF120 User Manual
Panasonic Answering Machine KX T5200 User Manual
Panasonic eBook Reader CF VDW07HM User Manual
Panasonic Fax Machine KX F590 User Manual