SCM 900
USER GUIDE
Congratulations on purchasing a Nady SCM 900 Condenser Microphone. These superior microphone is perfect for record-
ing studio vocals, acoustic instruments, orchestras and choral groups, ambient instrument audio, and many live sound ap-
plications. Powerful and versatile, the SCM 900 microphone meets the stringent requirements of even the most demanding
digital recording and live broadcasting applications.
This manual covers the operation of the SCM 900 microphone and the available optional accessories. To take full ad-
vantage of the superb features of your microphone, and to enjoy long and trouble-free use, please read this user’s guide
carefully.
UNPACKING, INSPECTION, STORAGE AND TRANSPORT
Your SCM 900 microphone was carefully packed at the factory, and the shipping carton (or carrying case) was designed to
protect the unit during shipping. Please retain this container for subsequent transport and in the highly unlikely event that
you ever need to return your microphone for servicing. The optional SMCC-2 aluminum carrying case is highly recom-
mended for the most convenient and safe transport or permanent storage. It has roomy compartments for your SCM 900
microphone and all available accessories, plus XLR cables.
OPTIONAL ACCESSORIES
• SCM 900 Microphone
• User Guide
• Warranty Card
• 48V Phantom Power Supply (SMPS-1)
• Aluminum Flight Case (SMCC-2)
• Shockmount (SSM-3)
• Leatherette Pouch
• Foam Windscreen (FW-2)
The SCM 900 microphone offers transformerless balanced outputs and true condenser design (elements constantly
biased by the pre-amp) for exceptionally low self noise and increased dynamic range, enhanced low and high end
response with improved linearity across the frequency range and maximum SPL capacity. Internal Low Cut filter switch to
minimize pop sound and stage rumble.
SCM 900 microphone features a large diaphragm capsule (1.0 inch), hand tooled from brass and featuring an ultra-thin (3-
micron) gold-evaporated on Mylar diaphragm for maximum sensitivity, transient response, long life, detail and tone.
The microphone uses carefully selected Field Effect Transistors (FET), specially chosen for their low distortion and
superior signal-to-noise ratio. (Note: For optimum performance, it is best to let your microphone warm up for 5 to 10
minutes)
SCM 900 is manufactured with the finest materials and features a machined housing with advanced internal shock mount
construction for the highest structural integrity and rugged reliability. It requires 48V phantom power to operate, typically
supplied by the microphone pre-amplifier or mixing console. The optional Nady SMPS-1 phantom power supply can also
be used.
|